Christie Spyder X20, Руководство пользователя

Страница: 71 / 172

Video Playback
Spyder X20 User Manual 71
020-000916-01 Rev. 1 (04-2016)
Configuring PlayItems
Core PlayItem properties include start and stop times for one or more connected playback devices, as well as
some fine tuning options for lead-in and lead-out. For clip controlled devices, an additional clip name field may
be required.
PLAYITEM SECTION
1. NAME: User defined name used to reference the PlayItem.
2. DEFAULT SOURCE: When dropping the PlayItem register onto the script,
a new source element will be created with this source name.
3. THUMBNAIL: Image shown throughout the Vista Advanced UI to
represent the PlayItem.
DURATION SECTION
1. PREROLL: Specifies the number of frames required to ‘ramp up’ to
normal playback speed. Usually required for tape-based playback
devices, but can also be useful as a lead-in time when mixing on a
Spyder layer at the beginning of playback. The PlayItem will be cued
to the specified In Point minus (-) the number of PreRoll frames.
2. ROLLOUT: Number of frames to run past the out point before
actually stopping the device. Can be useful as a lead-out time when
mixing off a Spyder layer at the end of playback.
3. IN POINT: Actual device timecode where PlayItem video should start
playing. The ‘Mark’ button beside this field will paste the current
timecode from the machine area of the panel into this field.
4. OUT POINT: Actual device timecode where PlayItem video should
s top playing. The ‘Mark’ button beside this field will paste the current
timecode from the machine area of the panel into this field.
MACHINES SECTION

FRAME RATE: Determines the overall frame rate for the PlayItem timecode countdown within Spyder.
This field should almost always match the frame rate of the first selected deck in this panel section.

<MACHINE CHECKBOXES>: Eight (8) checkboxes are provided, one for each SourceMaster port.
Checked items indicate that the associated deck is to be controlled as part of the PlayItem. At least one
port must be checked for the PlayItem to be considered valid, and multiple decks can be selected for
sync-roll operations.
Figure 37: PlayItem Property Panel