Keyboard functions
On Screen Display
Serial commands
Technical information
A
B
C
D
Source Setup
Stereo Setup
Preferences
Advanced
Info
Changes Done
.1
.2
.3
.4
.5
.6
On Screen Display
B
U
s
in
g
t
h
e
A
P
-c
o
n
v
e
rt
e
r
copyright Christie 2002.06
- 24 -
Source Setup
procedures. Both can be downloaded from the Christie
technical support
pages at
www.christiedigital.com
.
The AP-converter automatically adjusts the pixel tracking to match the incoming source, but
non-the-less it might be necessary to do final adjustments manually (unless the image signal
has already been stored). The AP-converter needs the image to have minimum one bright
pixel in both left and right border of the frame to do the adjustment. It also requires that the
guessed resolution is correct. This is the result in most cases, but if the auto setup doesn’t
provide you with a stable picture, a manual fine-tuning is needed.
If you are using analog VGA-cable, adjustments may have to be done in both the AP-converter
and the projector. Please refer to the user guide of your projector on how to adjust this. If
your AP-converter is connected to a projector using a DVI-cable this adjustment only has to
be done in the AP-converter (unless your projector overrides the DVI-signals).
Adjust the picture until you see no vertical bands. If you get rid of all the bands, but your
picture is still unstable, you will have to adjust the pixel phase as well.
Performing these adjustments requires carefulness and accuracy, but only has to be done
once per source. Make sure to store your settings after having achieved the desired result.
Содержание PASSIVE TO ACTIVE CONVERTER
Страница 1: ...USER MANUAL ACTIVE TO PASSIVE CONVERTER ...