Requirements
Setup procedure
Eyestrain
Remote controlling
A
B
C
D
Connecting projectors
Connecting the PC
Aligning the projector
Setting up linear polarizing filters
Enabling the stereo software
Connect the stereo sync cable
.1
.2
.3
.4
.5
.6
WARNING: Do not look
directly into the beam of the
projector! That may cause
damage to your eyes!
You must hold your head
(glasses) at a normal viewing
position while checking the
image.
Setup procedure
B
S
e
tt
in
g
u
p
t
h
e
A
P
-c
o
n
v
e
rt
e
r
copyright Christie 2002.06
- 11 -
Setting up linear polarizing filters
WARNING: Do not look directly into the
beam of the projector! That may cause
damage to your eyes!
It is important to get the left image at the left
eye. To do this, press the `right black button´
and the projector showing the right eye
will go black. Now put on a pair of polarizing
glasses, and hold one of the polarizing filters
in front of the projector that is not blacked
out. Rotate the filter until the image seen
through the right eye appears as black as
possible. (See
figure B.4-1
on the right).
It is important that your head and glasses
are at a normal viewing position horizon-
tally when doing this.
When the correct angle is found, place the
filter into the filter stand at that angle, in
such a way that it covers the projector light
beam. (See
figure B.4-2
on the right).
Do the same with the other filter (using the
figure B.4-1 (rotation)
figure B.4-2 (filterstand with filters)
Содержание PASSIVE TO ACTIVE CONVERTER
Страница 1: ...USER MANUAL ACTIVE TO PASSIVE CONVERTER ...
