Downloaded from Projector.com
14
Handling the Wireless Remote Control Unit
(continued)
Wired Connection
When the wireless remote control unit is used at a distance from the projector or there is an obstacle between them, the infrared
signal from the remote control unit may not reach the projector. In this case, connect the wireless remote control unit to the
projector using the wired cable (optional).
Wireless Remote Control Unit Laser Warning Label
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUME
SOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
AVOID EXPOSURE
-LASER
RADIATION IS EMITTED FROM THIS APERTURE
RAYONNEMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE2
EN60825-1 : 1994 + A11
LONGUEUR D'ONDE : 650nm
PUISSANCE MAXIMA : 1mW
CAUTION
VISIBLE LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH : 650nm MAX OUTPUT : 1mW
CLASS II LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN60825 - 1 : 1994 + A11
WAVE LENGTH : 650nm MAX OUTPUT : 1mW
LASER-STRAHLUNG
NIGHT IN DEN STRAHL
BLICKEN LASER KLASS 2
EN60825-1 : 1994+A11
WELLENLÄNGE : 650nm
MAX AUSGANGSLEISTUNG : 1mW
Place of
Manufacturer : A
Made in Japan
Complies with 21 CFR 1040.10 and 1040.11
REMOTE CONTROL MODEL LPF-720RC
May-2000
This wireless remote control unit is a Class 2 laser
product (max. output: 1mW; wave length: 650nm)
Warning
• The wireless remote control unit supplied with the projector emits a laser beam when the LASER button is pressed. Do not
stare directly into the beam or point the beam at anyone as this may result in loss of eyesight.
• Do not disassemble or modify the wireless remote control unit supplied with the projector as this may result in injury or failure.
Caution label
Year and Month
of manufacture
LASER button
WIRED REMOTE terminal
Wired cable
(optional: approx. 20 m (22 yards))
WIRED REMOTE terminal
Important
• When the wired cable (optional) is connected to the wireless remote control unit, the infrared signal isn’t emitted.
