Christie J 2.0 kW, Руководство по установке

Страница: 26 / 44

3-6 J Series 2.0, 2.4, and 3.0 kW Setup Guide
020-100751-03 Rev. 1 (02-2014)
Section 3: Operation
Contrast
Changes the level of peak white in your images. Use
L
EFT
/R
IGHT
A
RROW
K
EY
until you reach the desired level
of contrast—for best results, start low and increase so that whites remain bright but are not distorted or tinted
and that light areas do not become fully white (i.e., “crushed”). Conversely, low contrast causes dim images.
Bright
Increases or decreases the black level in the image. Use
L
EFT
/R
IGHT
A
RROW
K
EY
until you reach the desired
level of brightness. For best results, start high and decrease so that dark areas do not become fully black (i.e.,
“crushed”). Conversely, overly high brightness changes black to dark grey, causing washed-out images.
Gamma
Determines how grey shades are displayed between minimum input (black) and maximum input (white) for a
given amount of signal. The proper setting helps maintain optimized blacks and whites while ensuring a
smooth transition for the “in-between” values utilized in greys. Unlike brightness and contrast controls, the
overall tone of an image can be lightened or darkened without changing the two extremes and your images will
be more vibrant yet with good detail in dark areas when using the Gamma control.
The nominal setting for Gamma Correction of 0 is correct for most signals and conditions. If excess ambient
light washes out the image and it becomes difficult or impossible to see details in dark areas, increase the
gamma correction setting to compensate.
Number Keys
Press 1 to 9 to enter a value in a text box or to select a menu item.
10+
Press
0
before pressing another number to enter a number greater than 9, e.g. press
0
then
2
to enter the
number 12 as a menu selection.
NOTE:
When entering numbers in a text field, this button acts as 0 .
Help
Press
H
ELP
to display context-sensitive help. Press
H
ELP
again to toggle the help window OFF.
Menu
Press
M
ENU
to enter or exit the projector menu system.
OSD (On-Screen Display)
Press
OSD
then the
D
OWN
A
RROW
to hide the projector’s menu system during use. To see the menus again,
do one of the following:
• Press and hold
OSD
for two seconds.
• Press and release
OSD
followed immediately by
U
P
A
RROW
.
• Press
OSD, OSD.
Invisible menus are fully functional, enabling “hidden” access to numbered features and image adjustments by
entering the corresponding sequence of key presses on the keypad.
NOTE:
With OSD turned ON, you can still hide error messages and slide bars by disabling these options in
the Menu Preferences menu.