Christie FHD492-XV, Руководство пользователя

Страница: 12 / 44

Unpacking and installation
FHD492-XV and FHD552-XV User Manual 12
020-001139-01 Rev. 1 (08-2016)
Failure to follow correct mounting procedures could result in damage to the equipment or injury to the
user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws 10 mm longer than the thickness of the mounting
bracket and tighten them securely.
FHD492-XV 400(H) x 200(V) mm
FHD552-XV 400(H) x 400(V) mm
To prevent the display from falling:
• For wall or ceiling installation, install the display with commercially available metal brackets. For
detailed installation instructions, refer to the documentation included with the brackets.
• To lessen the probability of injury and damage resulting from the display falling during an earthquake
or other natural disaster, consult the bracket manufacturer for the recommended installation location.
To allow heat to disperse, leave a minimum of 25 mm between the display and any surrounding objects. For
larger video walls, allow for larger gaps around the display, depending on the size of the wall.
This display can be installed in portrait position.
1. If attached, remove the table stands.
2. While facing the back of the panel, rotate it 90
degrees counterclockwise.
3. Mount the display.
To install an OPS device on the display:
1. Remove the screws on the OPS cover.
2. Install the OPS device.
3. Fix the OPS device by screws.