Christie F100, Руководство по установке

Страница: 9 / 24

Pedestal and Frame Installation Manual 2-1
020-100734-02 Rev. 1 (11-2011)
2 Installation and Setup
Installation of a display wall for the FHD551-X LCD panels should be
undertaken only by qualified installers with the requisite training, knowledge and skill to
properly install the system.
The following instructions outline how to install a display wall for the FHD551-X LCD panel, as a single or
multi unit system – using the P100 pedestal and F100 frame. Additional important information relating to the
display wall can be found in the
ML10/MP10 40-65” LCD Video Wall Mount Instruction Sheet (P/N: 020-
100726-xx) and the LCD Panel FHD551-X User Manual (P/N: 020-100713-xx) . The installer should be
familiar with this information before starting the installation.
These instructions are intended to provide qualified installers with step-by-step installation information;
however, circumstances and conditions may vary from one installation site to another and the installer has the
sole and final responsibility for ensuring that the system is installed with due regard for all relevant safety
considerations. Installation steps are described in sequence and each step must be completed before moving on
to the next.
2.1 Components
All major components required to assemble a complete display wall are packaged and shipped separately to the
installation site. This includes the LCD panels, P100 Pedestals, F100 Frames and the LCD video wall mounts.
Each component comes with the hardware required for installation. Check the contents of your shipment
against the list below to make sure that you have all the necessary hardware.
NOTE:
Trained service technicians are available to diagnose and correct system-related problems. If you
encounter any problems during the setup and installation of your system, contact the authorized dealer or
Christie Partner from whom the system was purchased.
2.1.1 For P100 Pedestals (Hardware Kit P/N: 000-102657-xx)
• (2) Panel caps
• (16) Flat washers
• (8) M6 hex nuts
ɸ 6.5
• (8) M6 hex head bolt
• (8) Lock washers
• (8) M8 socket head cap screws
(for securing frame to pedestal)
• (16) Flat washers ɸ 8.4
• (8) M8 hex nuts
(for securing frame to pedestal)