Christie F100, Руководство по установке

Страница: 7 / 24

Pedestal and Frame Installation Manual 1-1
020-100734-02 Rev. 1 (11-2011)
1 Introduction
Every effort has been made to ensure the information in this document is accurate and reliable; however, due to
constant research the information in this document is subject to change without notice.

1.1 Using this Manual
To prevent physical injury or equipment damage it is important Section 2 Installation
and Setup is read in its entirety before installing this product.
This manual provides technical information for assisting qualified service technicians in the installation of the
P100 Pedestal and F100 Frame.
1.2 Labels and Marking
Observe and follow any warnings and instructions marked on the projector.
Danger symbols indicate a hazardous situation which, if not avoided, will result
in death or serious injury. This signal word is to be limited to the most extreme situations.
Warning symbols indicate a hazardous situation which, if not avoided, could
result in death or serious injury.
Caution symbols indicate a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE!
Addresses practices not related to personal injury .
1.3 Typographical Notations
The following notations are used throughout this manual:
• References to specific areas of the document appear italicized and underlined. When viewed online the text
appears in blue indicating a direct link to that section. For example, Section 1 Introduction .
• References to other documents appear italicized and bold, such as Service Manual .
• References to software menus and available options appear bold, such as Main menu,

Preferences .
• User input or messages that appear on screen, in status display units or other control modules appear in

Courier
font. For example.
“No Signal Present”, Login: christiedigital.
• Error codes, LED status appear in bold, e.g.
LP , A1 etc.
• Operational states of modules appear capitalized, such as power ON/OFF.