Christie DS+5K, Руководство пользователя

Страница: 45 / 152

Section 3: Operation
User’s Manual 3-19
.
NOTES: 1) If you enter a channel number that already exists, a dialog
message appears indicating that this number is already in use–assign a
different channel number.
2) You can define up to 50 channels.
•
INPUT:
1-8, corresponding to where on the projector’s input panel the source is
connected.
•
IN MENU:
If checked (default, except for automatically defined channels with
unchanged parameters), this defined channel will then appear in the list
available when
Channel
key is pressed. If unchecked, the channel must be
accessed via
Channel
on the keypad or via the Auto Source function.
NOTE: On-screen display of the channel list is an option that must be set in
the Menu Preferences menu.
•
AUTO SOURCE:
If checked, (default), the projector can automatically locate
this channel when an incoming input signal matches. If not checked, the
projector can locate the selected channel only when it is directly selected via
Channel
on the keypad—and a change in input signal will not result in a channel
change.
•
LOCKED:
If checked, all of the image settings for this channel are disabled. If
unchecked (default), all available image settings can be adjusted as desired.
You cannot use Auto Setup with a locked channel.
•
PREVIOUS CHANNEL:
Select this option to see or change Channel Edit settings
for the previous channel in the Channel Setup list.
•
NEXT CHANNEL:
Select this option to see or change Channel Edit settings for
the next channel in the Channel Setup list.
The most commonly used options for image adjustments are accessed through two
menus:
Size and Position (
1
Menu
) and Image Settings (
2
Menu
), both of which
appear in the Main menu. From either of these two menus, you can change settings
affecting the image from the current channel by working with the appropriate slide
bars, checkboxes and pull-down lists.
Exit
will return to the previous menu (or to the
presentation, if from the Main menu) and accept any changes you may have entered.
Settings are saved with the current channel.
From your presentation, you can access any of the individual options in these menus
by pressing
Menu followed by the appropriate two-digit number representing their
location in the menu system. For example, press
2 3
Menu
to quickly access the
“Gamma” option in the Image Settings menu.
Note that for certain options, you may prefer to use a “direct key” from presentation
level to go directly to a particular option without traveling through the menu system
(
available for certain display parameters only ). For example, press
Contrast
to access the
“contrast” slide bar immediately. Press
Exit
to return to your presentation.
3.5 Adjusting the
Image
Downloaded From projector-manual.com Christie Manuals