Christie DS+5K, Руководство пользователя

Страница: 61 / 152

Section 3: Operation
User’s Manual 3-35
.
3D STEREO SYNC DELAY
—
Set when the L/R frames begin, defining the best
reference point for synchronizing the display with your glasses. Proper adjustment of
this delay should eliminate cross-talk and odd colors caused by timing differences
between the glasses and the projected display. Use this slide bar only if the
Mirage 3D
Stereo Sync Cable is connected between the projector’s GPIO port and a server. Slide
bar values indicate the number of lines that are delayed.
FRAME LOCK ENABLE
—
This option allows the projector to control the output frame
timing based on the input signal. The locked option forces (if possible) the output
image to be phase locked to the input frames. Rate Matched means that the output
runs at close to the input frequency but isn’t locked to it so the output will drift in
phase relative to the output. Free Run forces the output to run at a 60Hz frame rate.
NOTE: 1) See separate Using 3D in Mirage manual provided for additional
information.
WARP LATENCY —
Requires optional ChristieTWIST module. See ChristieTWIST
User’s Manual provided with the module.
Advanced Image Settings continued
— SUBMENU
MOTION FILTER —
This control is most useful for smoothing out moving images from
interlaced sources. In most cases the proper Motion Filter setting is
automatically determined according to the type of incoming source
signal. However, if your source is jittery and/or tearing you may wish
to “force” a setting to ensure stable processing for this source—if
desired, override the default “Auto” setting by selecting the appropriate
motion filter:
1.
AUTO:
The projector will automatically use the correct motion filter according
to the incoming signal.
2.
STILL:
For static images with no motion, such as graphics from a CD.
3.
MOTION:
For video images that did not originate from film, or for moving
computer-generated images.
4.
FILM:
For video images that originated from film. This will optimize image
quality and stability.
FILM MODE THRESHOLD
—
This setting determines how sensitively the projector can
detect if an incoming video signal originated from film or not. It should not require
adjustment.
DETAIL THRESHOLD
— Use “Detail Threshold” to define at what frequency level the
“Detail” control will begin to magnify high frequencies, which adds details back into
the image. Raise the threshold to
ignore more of these high frequencies, and lower the
threshold to magnify more of these frequencies. A setting of “0”, for example, means
no noise will be ignored and all will be magnified. An ideal detail threshold is one in
which high frequencies that are causing objectionable noise are
not magnified when
using “Detail”, but frequencies which can help sharpen an overly-soft image are
magnified.
Downloaded From projector-manual.com Christie Manuals