Christie DS+5K Скачать руководство пользователя

Страница: 92 / 152

Section 3: Operation

3-66 User’s Manual

Edge Blending Procedure

NOTES:

Before attempting to work with edge blending software functions, you must

physically align the projectors/images by correctly overlapping the displays from

your intended external source, and

Match colors and Brightness Uniformity.

IMPORTANT

For a shared edge, all

Blend

procedures and settings

should be identical on BOTH projectors.

1. Start with 2 projectors. Display full white field test pattern from both.
2. In the

Edge Blending

submenu, enable

Edge Blending

by entering a checkmark in

the top checkbox.

SET STARTING POINTS FOR ADJUSTMENT

Set all blend widths to 0.

Go to “More” and set everything in the

Edge Blending (2)

menu to 50.

Figure 3.21. Set Starting Points for Each Projector

SET BLEND WIDTH

: On one projector, increase the

Blend Width

for an overlapping

edge (for example, if the projector’s image is on left, its right edge overlaps the
adjacent image—adjust

Right Blend Width

). Use the same setting on the second

projector for this shared edge.

5. Re-adjust width (both projectors) until the overly bright band at the midpoint of the

overlapping blends disappears or

just

changes to very light gray. For the shared

edge, use the same

Blend Width

setting on each projector. If the “best blend”

appears to be between two settings, choose the wider setting for both projectors.

CHECK BLEND:

If the blended region appears too dark or light in relation to the rest

of the image:

Increase

Blend Midpoint

in both projectors to “lighten” the overall blend,

decrease to “darken” the overall blend.

Adjust

Blend Shape

in both projectors to fine-tune change the amount of mid-

gray intensity (as opposed to black/white) in the blend.

7.  Repeat with remaining projectors / overlaps.
8.  Check completed display wall with the desired external signal.
9.  Adjust mechanical alignment if necessary to maintain perfect pixel-on-pixel

alignment over time.

Downloaded From projector-manual.com Christie Manuals

Содержание DS+5K

























































































































































Результаты поиска

Содержание DS+5K

Отзывы:

Похожие инструкции для DS+5K

Бренды по названию

Популярные бренды

Christie DS+5K, Руководство пользователя

Результаты поиска

Содержание DS+5K

Отзывы:

Похожие инструкции для DS+5K

Бренды по названию

Популярные бренды