Christie CS50-D100U, Руководство пользователя

Страница: 45 / 116

OPERATION
3-28
RPMS, CS50 & CS70-D100U/UF User’s Manual
SELECT COLOR TEMP
–
The current color temperature is shown in the menu and can
be changed here just as in the Color Setup menu. When a User color temperature is
selected, the White Level and Interpolated options are disabled and can be adjusted
to create your own color temperature.
INTERPOLATED COLOR –
Use this option to increase or decrease the value of
Interpolated Color if you need a specific color temperature somewhere in between
two preset color temperatures. For example 7841 is interpolated from 6500 and 9300.
WHITE LEVELS –
These 3 controls are adjustable only if a User choice is selected (in
which case User 1, 2, 3 or 4 appears at the top of the Color Temperature Setup
menu). Their current values are shown for the active color temperature. Changing a
white level here changes the drive (contrast) for that color essentially creating a new
color temperature that is “warmer” or “cooler” etc. For maximum overall
brightness, always keep at least one white level at 100. When you are satisfied
with the new “User” temperature, it can be used immediately upon exit or it can be
selected from either the Color Setup menu or the Color Temperature Setup menu, as
usual. You can re-define a User color temperature at any time using the Color
Temperature Setup menu.
COLOR ENABLE –
Select which color or colors you want to see, useful while working
with color temperature white levels.
COPY FROM –
Use this option to replace the currently selected User color
temperature setup with that of another. This function can be particularly useful for
creating a starting point for a new User color or for accessing an unaltered factory
default. It is disabled for all color temperatures except User. See Figure 3.14.
Figure 3.14. “Copy From”
How do you copy a Color Temperature?
To create a starting point: To set a starting point for a new custom user color
temperature, select a user temperature, then highlight Copy From and select a