Christie CS50-D100U, Руководство пользователя

Страница: 22 / 116

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual
3-5
functions are disabled. To leave standby press and hold
Stby
*
again (or use
Stby
*
OFF
). Or simply press
Exit
or
Menu
.
Menu
Press
Menu
to display the Main menu. A list of several options appears for access to
specific functions, such as Configuration or Image Settings. Press
Menu
again to
remove all menus and return to presentation level.
Enter
Press
Enter
to select a highlighted item, to toggle a checkbox (checked vs.
unchecked), or to accept a parameter adjustment and return to the previous menu or
image.
Exit
Press
Exit
to return to the previous level, such as the previous menu.
NOTE:
Exit
does not save changes within text editing boxes (including number
editing of a slidebars) or within pull-down lists. It acts as a “cancel” in these cases.
Arrow Keys
The arrow keys have a variety of functions depending on the situation. Some typical
uses are described below. See also Editing Text later in this section.
•
Use or to change a slidebar value—hold as desired for continuous
adjustment (note the adjustment increments and range depend on the parameter
being adjusted).
•
Use or to change to a different option within a pull-down list without
having to display the list first
•
Use or to jump between “pages”, such as in Help or lengthy pull-down
lists.
Use the
ON
or
OFF
keys to navigate within a menu, pull-down list or text box, or to
increase or decrease the value in the second (bottom) slidebar of a double slidebar.
You can also use
ON
or
OFF
in conjunction with certain toggle keys—i.e., those
including an asterisk symbol—to ensure a toggle only in the desired direction. If you
press
Power
*
and hold it for approximately 1 second in hopes of turning the projector
on, the projector will actually turn off if the projector was already on. Instead, to
avoid the risk of toggling in the wrong direction, quickly press and release normally
the function key you wish to toggle (in this case
Power
*
). Then immediately (within 2
seconds) press either
ON
or
OFF
as desired. The specific toggle will occur.
Toggle keys are labeled with an asterisk on the keypad. They are listed below:
•
Stby
*
+
ON
= put the projector in standby mode
Stby
*
+
OFF
= leave standby
•
Power
*
+
ON
= turn the projector on
Power
*
+
OFF
= turn the projector off
•
Display Display
*
+
ON
= turn the menu system on
Display Display
*
+
OFF
= turn the menu system off
Menu
Enter
Exit
, ,
ON
,
OFF