Christie CS50-D100U, Руководство пользователя

Страница: 42 / 116

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual
3-25
Brightness
(
SHORT CUT:
Press
Bright
and adjust the slidebar.)
Brightness increases or decreases the amount of black in the image (0-100). Start
high and decrease so that dark areas do not become black (i.e., are “crushed”).
Conversely, high brightness changes black to dark gray, causing washed-out images.
For best results, keep close to 50.
Pixel Phase
–
Refer to description in Size and Position
( SHORT CUT:
Press
Pixel
and adjust the bottom slidebar.)
Detail
( SHORT CUT:
Press
Detail
and adjust the slidebar.)
Detail adjusts the sharpness of the video image. Use or until the display is
as sharp as possible, keeping in mind that any level of detail above 3 (default) will
increase the level of detail as well as introduce some level of noise in the image. Set
below 3 to filter the signal and remove noise from a noisy source. Keep at 3 to apply
no detail.
Color Space
Color Space determines how the color components of an input signal are decoded for
accurate color in the display. Selecting a color space option is useful only for analog
signals connected to
INPUT 1
or
INPUT 2.
Although the projector determines the color
space for such a signal, in some circumstances, you may wish to override this and
manually set a different color space.
NOTE: For digital signals or for signals connected to
INPUT 3
or
INPUT 4
, the color
space function is entirely automatic and the pull-down list disabled.
The current color space appears in the Image Settings menu. Press
Enter
to select a
different option:
•
Select
RGB
unless you are using component video at
INPUT 1
or
2.
•
Select
YPbPr (Video)
with a standard definition televised signal (SDTV)
•
Select
YPbPr (HDTV)
with a high definition televised signal (HDTV).
NOTE: When certain RGB signals are first connected, the projector may not initially
recognize them as RGB and will incorrectly decode their color information as YPbPr
(video). These signals can include:
•
RGB signals in NTSC, PAL, SECAM frequency ranges