Christie CP2308 Скачать руководство пользователя страница 18

Страница: 18 / 111

Calibrating the touch panel display

Calibrate the touch panel to improve its appearance and responsiveness to touch commands.

1. Log on to the projector.
2. In the left navigation menu, tap Service Setup > Preferences.
3. Tap Touch Panel.
4. To calibrate the touch panel, tap Start Calibration.

Turning the lamp on or off

Turn the lamp on to display content or view test patterns, turn the lamp off to extend lamp life.

•

To turn the lamp on or off, in the right toolbar, tap and hold Lamp.

Opening or closing the douser

Open the douser to display light on the screen, or close the douser to remove light from the screen.

•

In the right toolbar, tap and hold Douser.

Selecting a channel

Create channels to store customized projector settings for different inputs.

1. In the right toolbar, tap Channels.

The Channels window displays the available channels.

2. Tap a channel.

In the Channel Setup panel, a green checkmark indicates the active channel.

Adding a network time protocol server

Add a network time protocol (NTP) server to synchronize the time on all installed projectors in the

same region.

1. In the left navigation menu, tap Service Setup > Time Setup.
2. Tap the Time Sync using NTP Server slider.

The color of the slider changes to green to indicate it is active.

3. Tap + New NTP Server.
4. Select a local or a public NTP server:

•

To use a local NTP server, tap Local Server and type the IP address in the IP Address
field.

•

To use a public NTP server, tap Public Server and complete the Country and Server fields.

5. To test the connection, tap Test.

Operating the projector

CP2308 User Guide

020-102535-03 Rev. 1 (08-2018)

Содержание CP2308















































































































Результаты поиска

Содержание CP2308

Отзывы:

Похожие инструкции для CP2308

Бренды по названию

Популярные бренды

Christie CP2308, Руководство пользователя

Результаты поиска

Содержание CP2308

Отзывы:

Похожие инструкции для CP2308

Бренды по названию

Популярные бренды