Christie Christie DS+10K-J, Руководство по обслуживанию

Страница: 7 / 77

J Series 1000W and 1200W Service Manual 1-1
020-100725-04 Rev. 1 (07-2015)
1 Introduction
Every effort has been made to make sure the information in this document is accurate and reliable; however,
due to constant research the information in this document may be subject to change without notice.

1.1 Labels and Marking
Observe and follow any warnings and instructions marked on the projector.
Danger symbols indicate a hazardous situation which, if not avoided, will result
in death or serious injury. This signal word is to be limited to the most extreme situations.
Warning symbols indicate a hazardous situation which, if not avoided, could
result in death or serious injury.
Caution symbols indicate a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE!
Addresses practices not related to personal injury .
1.2 Purchase Record and Service Contacts
Whether the projector is under warranty or the warranty has expired, the highly trained and extensive Christie
factory and dealer service network is always available to quickly diagnose and correct projector malfunctions.
Should you encounter a problem with any part of the projector, contact your dealer. In most cases, servicing
can be performed on site. If you have purchased the projector, fill out the information below and keep with
your records.
Table 1.1 Purchase Record
* The serial number can be found on the rear of the projector.
Table 1.2 Ethernet Settings
Dealer:
Dealer Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
Default Gateway
DNS Server
Projector Address
Projector Mgmt IP Address
Subnet Mask