manualshive.com logo in svg

Christie ACT, Руководство пользователя

Поделиться
Скачать
Christie ACT Скачать руководство пользователя страница 10

1-2

Christie ACT User Manual

020-100129-05 Rev. 1 (02-2010)

Section 1: Introduction

1.1 Using this Manual

USERS

/

OPERATORS

:

 This manual is intended for trained users authorized to operate electronic components 

within Christie 

ACT

, located in restricted area such as projection rooms in theatres.

SERVICE

: 

There are no serviceable parts within Christie 

ACT

.

This manual contains the following sections:
•

1 Introduction

•

2 Installation and Setup

•

3 Operation

•

4 Maintenance

•

5 Troubleshooting

•

6 Specifications

Disclaimer:

Every effort has been made to ensure the information in this document is accurate and reliable. However, due to constant research, the 
information in this document is subject to change without notice. Christie Digital Systems assumes no responsibility for omissions or 
inaccuracies. Updates to this document are published regularly, as required. Please contact Christie Digital Systems for availability.

1.1.1 Typographical Notations

The following notations are used throughout this manual:
References to specific areas of the document appear italicized and underlined. When viewed online the text 
appears in blue indicating a direct link to that section. For example, 

Section 6 Specifications

.

• References to other documents appear italicized and bold, such as 

Christie User Manual. 

• References to software menus, tabs, and available options appear bold, such as 

Operator

 

Menu, Editor

: 

Script

 

Menu, 

and 

Config.

• User input or messages that appear on screen, in status display units or other control modules appear in 

Courier font. For example.

 “No Signal Present”, Login: christiedigital.

• Error codes, LED status appear in bold, e.g. 

LP, A1

 etc.

• Operational states of modules appear capitalized, such as “power ON, power OFF”.

• Signal words, such as 

Warning

, 

Caution

 and 

Notes

 are used in this manual to point the reader to specific 

information or instructions that warn of safety related hazards which may be present and how to avoid 
them.

Содержание ACT











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды