manualshive.com logo in svg

Christie ACT, Руководство пользователя

Поделиться
Скачать
Christie ACT Скачать руководство пользователя страница 13

Section 1: Introduction

Christie ACT User Manual

1-5

020-100129-05 Rev. 1 (02-2010)

1.3.1 Key Features

• Inputs - 16 opto-isolated inputs
• Outputs - 14 relays Single Pole Single Throw (SPST)
• GPIO - 7 non-isolated with 12V rail
• Control Interface - 8 front panel buttons
• Power - Dual voltage (120/240 VAC) input
• Accessory Power - 12V and 5V terminals
• Dimensions - 2 Rack Unit Height
• Web User Interface
• Serial Control RS232 and RS422
• Ethernet
• RS232 (loop-through)
• 14 programmable LEDs
• Status LEDs
• Available Buzzer (user configured)

1.3.2 Inputs

There are 16 inputs (32 terminals) located on the back panel of Christie 

ACT. 

(

Figure 1-2

). 

There is an option 

to interna

lly pull up any of the inputs to an isolated 5V via software control. The input pull-up feature is 

disconnected by default. 
The internal pull-up to 5V is useful when interfacing with other equipment's contact closures (such as relays). 
The internal input pull-ups provide a voltage to active the inputs.
If available, an emergency situation input can be connected and the automation is able to control the 
appropriate auditorium functions (lights up, projector off, etc.) in case of an emergency. Refer to 

Section 3 Operation

.

1.3.3 Outputs

There are 14 relay outputs (28 terminals) all of which are normally open (N/O) single pole single throw (SPST) 
located on the back panel of Christie 

ACT

. The first 12 are rated for 1A, and the last two are rated for 8A. The 

external power terminals can be connected to allow the relay outputs to carry some voltage.
Relays can be grouped together (connect common for multiple signals) by using jumper leads at the 
connectors.

 Figure 1-2 Chrisite 

ACT 

Back Panel

Содержание ACT











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды