Commands
Command
Description
Values
WPK <value>
Sets the white peak.
0 to 100
Examples
Set the white peak to 50:
(WPK 50)
WRP–Geometry Correction
Applies a geometry correction to an image.
Commands
Command
Description
Values
WRP+SLCT <value>
Applies a geometry correction to
an image.
0 = Off—Does not apply a geometry correction to the
image (Default)
1 = Basic—Adjusts keystone and pincushion when a
Dual Processor Warp module (DPWM) is not installed. If
a DPWM is installed, keystone, pincushion/barrel, and
four-corner can be adjusted.
2 = Curve—Adjusts curve and four-corner when a
DPWM is installed; this option is unavailable if a DPWM
is not installed
3 = Rotate—Adjusts rotate and four-corner when a
DPWM is installed; this option is unavailable if a DPWM
is not installed
WRP+HKST <value> Corrects image distortion
created when the projected
image is to the left or right of
the lens axis. Increase the value
to in crease right keystoning.
When DPWM is not installed, adjustment range is:
0 to 100
50 (Default)
When DPWM is installed, adjustment range is:
0 to 20
10 (Default)
WRP+VKST <value>
Corrects the distortion created
when the projected image is
above or below the lens axis.
Increase the value to increase
positive keystoning.
When DPWM is not installed, adjustment range is:
0 to 100
50 (Default)
When DPWM is installed, adjustment range is:
0 to 20
10 (Default)
Serial API commands
GS Series 599 Serial Commands Technical Reference
63
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
