(CLC 2)
CLR–Color
Adjusts the saturation (amount) of color in an analog video image.
Commands
Command
Description
Values
CLR <value>
Set the color saturation value.
0 to 100
50 (Default)
Examples
Set the color saturation value to 50:
(CLR 50)
CNR–4-Corner Geometry Correction
Fits an image in an area defined by x and y coordinates.
This command is not available if a Dual Processor Warp module (DPWM) is not installed.
Commands
Command
Description
Values
CNR+TLCX <value>
Applies a top left horizontal adjustment. (Write-only)
0 to 140
0 (Default)
CNR+TLCY <value>
Applies a top left vertical adjustment. (Write-only)
0 to 80
0 (Default)
CNR+TRCX <value>
Applies a top right horizontal adjustment. (Write-only)
0 to 140
0 (Default)
CNR+TRCY <value>
Applies a top right vertical adjustment. (Write-only)
0 to 80
0 (Default)
CNR+BLCX <value>
Applies a bottom left horizontal adjustment. (Write-only)
0 to 140
0 (Default)
CNR+BLCY <value>
Applies a bottom left vertical adjustment. (Write-only)
0 to 80
0 (Default)
CNR+BRCX <value>
Applies a bottom right horizontal adjustment. (Write-only)
0 to 140
0 (Default)
CNR+BRCY <value>
Applies a bottom right vertical adjustment. (Write-only)
0 to 80
Serial API commands
GS Series 599 Serial Commands Technical Reference
19
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.