Chore-Time ULTRAFLO Cage Free, Инструкция по установке и эксплуатации, Страница: 28 / 46

Installation
28
MC2507A
Non-Suspended (Stand) Systems
1.Install Foot Stands (Item 1) and Feeder Perch Angle Braces (Item 2) as shown . Use appropriate holes in
the Foot Stands to level the System.
2.Ensure that Perch Tubes are cut even with the End Caps and install Conduit Plugs (Item 12) as shown.
3.Fasten two Motor Supports (Item 7) to the Power Unit (Item 6) with 5/16 Bolts, Nuts and Washers (Items
8,9, & 10) as shown.
4.Secure the Power Unit (Item 1) to the Base Connector, using 1/4-20 Lock Nuts (Item 11) , previously
removed. (See Figure 21.)
5.Secure the Motor Supports to the Perch Tube with U-Bolts (Item 5) as shown .
Figure 27.Power Unit Installation (Stand systems)
9
6
10
8 x4
x4
7 x2
Item Description Part No.
7 Motor Support 56550
8 5/16-18 x .75 HH5 Bolt 2046
9 .875 x .376 x .079 Washer 546
10 5/16-18 Serrated Flg. Nut 8490
11 1/4-20 Ny. Insert Lock Nut (4
Removed in
(Figure 21) on page 23 )
1269
12 1" Conduit Plug 56264
Item Description Part No.
1 Foot Stand 56523
2 Feeder Perch Angle Brace 56524
3 1/4-20 x .63 HH5 Bolt 2152
4 1/4-20 Serrated Flange Nut 46460
5 1/4-20 U Bolt 56487
6 Power Unit Assembly --
1
2
12
11 x4
x4
5
3
4
11
11