Chore-Time ULTRAFLO Cage Free, Инструкция по установке и эксплуатации, Страница: 21 / 46

Installation
21
MC2507A
3 Perch Feeder Supports, Perch Tubes, & Angle Braces (For resting on Stands)
1.Cut the Bell end off of Troughs (Item 1) where End Cap Assemblies (Item 2) are needed. (See Figure 16.)
2.Install Perch Feeder Supports (Item 3) as shown . Supports must be put on before Troughs are fastened
together.
3.Install Foot Stands (Item 4) and Feeder Perch Angle Braces (Item 14) as shown . Use appropriate holes in
the Foot Stands to level. Angle Braces (Item 14) are required at System Ends and at Power Unit locations.
4.See “Suspension at Elbows” on page 30 for instructions for supporting Elbows.
5.Install End Caps (Item 2) at the ends of System and at Power Units. (See Figure 20 on page 22) .
Important! Do Not use the Nuts included with U-Bolts (Item 8) . Use 1/4-20 Lock Nuts (Item 9) instead .
6.Install Perch Tubes (Item 7) using 1/4-20 U-Bolts (Item 8) and Conduit Plugs (Item 10) as shown.
7.Use 1" Conduit Couplers (Item 11) where needed to splice Perch Tubes.
Item Description Part No.
1 Double Sided UF Trough 56110-X
2 End Cap Assembly 56115
3 Three Perch Feeder Supports 56418
4 Foot Stand 56523
5 1/4-20 x .63 HH5 Bolt 2152
6 1/4-20 Serrated Flange Nut 46460
Item Description Part No.
7 Perch Tube (20’ piece) 52767
8 1/4-20 U-Bolt 56487
9 1/4-20 Lock Nut 1269
10 1" Conduit Plug 56264
11 1.00" Aviary Conduit Coupler 52900-1
12 10-24 x .500 Machine Screw 1795
13 10-24 Kepnut 27725
14 Feeder Perch Angle Brace 56524
Figure 18.Installing 3 Perch Feeder Supports (Stand System)
Bell
1
2
3
3
11
4
5
6
Adjust Foot Stands
to level System.
Level
10
8
14
9
9
8
12
13
6" [152.4mm]
Maximum
6" [152.4mm]
Maximum
7