5
powering up
for the BLU
If you are powering the BLU up from standby mode simply press the
STANDBY
button on
the top panel controls or the
STBY
on the remote control .
If you are powering up the BLU from cold then press the bottom part of the power switch
labelled ‘I’. If the BLU has no disc loaded, the top panel display with read “NO DISC”; if a
disc has been loaded then the number of tracks and length of the CD will be shown. Please
allow a short time for the BLU to read the disc’s Table of Contents (TOC). During this
time the display will indicate “-- ----“
For all Choral products except the BLU
Press the bottom part of the power switch labelled ‘I’.
powering down
for the BLU
For everyday use there is no need to power down the BLU completely, you can put the BLU
into standby mode instead. Press the
STANDBY
button on the top panel controls or the
STBY
on the remote control to put the BLU into standby mode. If at this point, you wish to
power down the BLU completely then press the top part of the power switch labelled ‘O’.
For all Choral products except the BLU
Press the top part of the power switch labelled ‘O’.