4
safety warnings
It is important that your equipment is earthed at all times via its own mains lead. Failure to
do this may be hazardous. The power supply components within the units are designed to be
operated at lethal voltages and energy levels. Circuit designs that embody these components
conform with applicable safety requirements. Precautions must be taken to prevent accidental
contact with power-line potentials. Do not connect grounded test equipment.
This unit complies with EN 5008 1-1 and IEC 80 1/2
Caution:
The BLU employs a laser that emits both visible and invisible radiation.
Removal of the top cover or tampering with any of the enclosed electronics may result in
exposure to hazardous levels of laser radiation that could cause eye damage. To prevent
injury this product should be returned for qualified service to Chord Electronics Ltd.
There are no user serviceable parts within any Chord Electronics Choral
product. Unauthorised tampering or dismantling of this product will
invalidate the warranty and could cause injury
mains connection
The mains connector of your Choral product is at the back of the unit. Plug the female end
(socket) of the mains cable into the power connector of your Choral product, and the male
end (plug) of the mains cable into mains wall socket or mains extension socket. The mains
connector type will differ slightly for each Choral product. This is due to the highly
compact nature of this range requiring differences in chassis metalwork for each product.
Live Neutral
Mains
Switch
Earth
Mains
connector