13
viewing the settings for the main line
To view the settings for the main line press and hold button A for two seconds. The first
information that is shown is the current gain setting for the input line that is assigned to the
main line output. The PRIMA stores the gain setting for each input line. There are six gain
settings available in total that can be assigned to each input line and these are shown
below. After the gain setting has been shown for a second, the input line that is currently
assigned to the main line is displayed.
viewing the settings for the tape line
To view the settings for the tape line press and hold button B for two seconds. The first
information that is shown is the current gain setting for the input line that is assigned to the
tape line output. The PRIMA stores the gain setting for each input line. There are six gain
settings available in total that can be assigned to each input line and these are shown
below. After the gain setting has been shown for a second, the input line that is currently
assigned to the tape line is displayed. When you are viewing the tape line settings, the
display will indicate it is the tape line settings you are viewing using the letters ‘TP’. The
number of the input line that is assigned to the tape line is also shown. The diagrams below
show the possible display settings for each input that can be set to the tape line outputs.
Input lines that can be assigned to the tape line outputs
listening to the input assigned to the tape line
If you wish to listen to the input that you have assigned to the tape line, you must assign
the same input to the main line outputs using button A.