Chord PRIMA, Руководство пользователя, Страница: 15 / 18

15
input gain control
on the PRIMA
You can adjust the input gain on you input devices so that you can align the volume levels
of your different inputs. There are six settings, which are x0.25, x0.50, x0.75, x1.00, x1.25
and x1.50.
Most modern input devices such as CD players have an unbalanced output voltage of 2V
and a balanced output 4V, which does not require any increased gain amplification. In fact,
to increase the gain on such an output level can lead to distortion of the sign al.
However, older audio equipment may have an output voltage of less than 2V, in which
case you may like to adjust the input gain.
increasing the input gain of the input assigned to the main line
1. Press M on the pre amp remote followed by the VOL button marked
A
or
2. Press the
MAIN LINE LISTEN
LCD touch pad on the Chord touch screen
remote followed by the mechanical button marked VOL+ .
3. Each time you carry out steps 1 or 2, the input gain assignment will be stepped up
through the available settings.
reducing the input gain of the input assigned to the main line
1. Press M on the pre amp remote followed by the VOL button marked V or
2. Press the MAIN LINE LISTEN LCD touch pad on the Chord touch screen
remote followed by the mechanical button marked I
VOL-.
3. Each time you carry out steps 1 or 2, the input gain assignment will be stepped down
through the available settings.
increasing the input gain of the input assigned to the tape line
1. Press T on the pre amp remote followed by the VOL button marked
A
or
2. Press the TAPE LINE LISTEN LCD touch pad on the Chord touch screen
remote followed by the mechanical button marked
VOL+
.
3. Each time you carry out steps 1 or 2, the input gain assignment will be stepped up
through the available settings.
reducing the input gain of the input assigned to the tape line
1. Press T on the pre amp remote followed by the VOL button marked V or
2. Press the TAPE LINE LISTEN LCD touch pad on the Chord touch screen
remote followed by the mechanical button marked I VOL-.
3. Each time you carry out steps 1 or 2, the input gain assignment will be stepped down
through the available settings.