Choc Edge Choc Creator V2.0 Plus, Руководство пользователя

Страница: 29 / 44

Choc Edge
29
Drive Gear Diameter (mm) with 0.8mm nozzle :
If too much chocolate is extruding, input a higher value of 1200~1500.
Likewise, if too little chocolate is extruding, input a lower value of 1000~1200.
*
1200 ~ 1500 HIGH = HIGH PRECISION = FINE DETAILED LINES (Lines are thin because the extrusion is weaker)
*
1000 ~ 1200 LOW = LOW PRECISION = THICK LINES (Lines are thick because the extrusion is stronger)
4.2.6
Once a G-code file has been generated, it can be found in the same folder as the 3D model.
Example:
Slicing Profile
Do not select
the first two
settings
Select from
default
printing
parameters
Generate G-code
Print-O-Matic Print-O-Matic
Object infill quantity in %
(Recommended 0%~35%)
Layer Height in mm is determined by
nozzle size (0.8mm nozzle)
For shells, see 4.5.2 on page 33
(Recommended 0)
Feedrate in mm/s is Speed 1 :
Speed when printing/extruding
Travel Feedrate in mm/s is Speed 2 :
Speed when travelling
Set the size of nozzle (0.8mm)
Set the force at which chocolate is extruded
An example of a
progress bar seen
when generating a
G-code
*