CHMER WIRE CUT- EDM, Руководство по эксплуатации

Страница: 20 / 20

CHMER Wire-Cut EDM Operation Manual W5F
8. B
.
PT
This key is for break point quick return. When it is pressed, the worktable will
return to wire break point quickly. If the indicator is lit, it represents that the
present position is the break point.
9. RE-TRACE S
.
PT
This key is for start point tracing. When it is pressed, the worktable will return
to wire break point then return to the start point along the previous machining
path at last. (Auto wire feeding)
10 . TRACER B
.
PT
This key is for break point tracing. When it is pressed, the worktable will return
to start point then return to the wire break point along the previous machining
path at last. (Auto wire feeding)
Note. 1. Those four path trace functions #7~#10 can only be executed
one at a time.
2. The data of trace path according to the last G92 coordinate in processing.
3. While reboot the machine, it restore the last path data which had been
stored.
4. Press can interrupt during the trace function is activated.
5. User can start these four functions (path trace) when EDM spark power
is activated (Water flushing, wire feed, spark, ED -POS).
6. Auto wire feed would be activate when execute those trace functions.
11. OPT STOP
This is for optional pause. When the indicator is lit, if the program is executed
to M01, the machine will pause and systems of water supply, wire feeding and
electric power are will be off. If the indicator is off, M01 will be ignored.
12. BLOCK SKIP
This is for optional block skip. When the indicator is lit, the block interval
marked by “/” will be ignored. When the information is loaded from memory
to buffer area, the skip setting will be kept. This bottom is unavailable during
processing is activated.
13. SINGLE BLOCK
This is for single block execution. When pressing this key during program
1-8