Please Read This Manual Thoroughly Before Operation
Thank you for buying our product, and for the chances of being able to offer you
our high quality wire EDM series machinery and also the best after-sale services.
In order to maintain machine’s peak performance and extend its life span as long
as possible, we sincerely suggest all the operators carefully read this manual for
first time operation. Also, for your safety, please read the following “must-
known” precautions:
1.
Wire EDM operators should have received relative training from our
local agency, or directly from CHMER headquarter.
2.
CHMER wire EDM can only applied to the machining of several kinds
of
metal work-piece, such as steel, aluminum, tungsten steel, copper and
graphite.
3.
Push emergent switch before executing any one of following tasks:
(1). Cleaning or sorting waste wire.
(2) Replacing resin or paper filter.
(3) Filling up water tank.
(4) Opening power cabinet.
4.
Push emergent switch and turn off rotary switch immediately when any
one of the following situations occurs.
(1)
Hearing of funny noise, or any abnormality occurs during
machining.
(2)
Unloading any machine’s power wire (in power cabinet, water
tank, or cooling machine.). Please contact our local agency first,
or CHMER headquarter for this.
5.
To avoid dangerous shock, be sure to stop electricity discharging before
installing copper wire and work-piece.
6.
Do not touch any part around worktable (upper/lower head, wire and
water) during machining to prevent from high voltage strike.
7.
Do not modify electrical circuit.
8.
Please take reference to relative chapter in this manual for daily
maintenance.
9.
Please keep this manual closely with the machine.
Thank you again for purchasing CHMER’s product. Please call our Service
Department at 886-4-23500979 anytime for technical support and repair.
It is our honor to be at your service…
