Precautions for Selecting a Location
6
Install in a well-ventilated place. Traces of gas may be generated during
production of the water.
WARNING
DO NOT install the device in the following areas as doing so may cause
damage to the device:
·
Areas that are exposed to outdoor air, wind, or direct sunlight.
·
Areas that are near the presence of explosive gas, flammable gas, or
corrosive gas
·
Areas that are in direct line of warm or hot air exhaust from heating
appliances, cookware, and other equipment
·
Areas that are damp and dusty
·
Areas that are humid, such bathrooms and agricultural greenhouses
·
Areas whose room temperature is higher than 104°F (40°C)
·
Areas that are closed with poor ventilation.
·
Areas that are likely to freeze
·
Areas where water falls directly on the device.
·
Areas where there is a high salt concentration in the air
Place the device on a level surface that is free from vibration and shock.
Ensure that the surface is fixed firmly in place so that it does not fall or tip
over; otherwise, injury and/or damage may result.
If necessary, secure the device on a wall using the wall hook set, sold
separately. Select a wall location with adequate strength to receive fasteners.
securely to hold up the device. Consult a local contractor if required.
DO NOT install the device upside down or sideways; doing so may cause
failure of the device.
Position the dispensing hose head in the sink, as residual generated water will
drip after use.
