Precautions about the Water Supply
7
NOTE
Water Quality
Use only tap water conforming to the local water quality standards, suitable
for drinking, cooking, and the flushing of toilets. DO NOT use untreated
well water or industrial water.
Water Pressure
Use tap water with water pressure from 14.5 psi to 101.5 psi (0.1 ~ 0.7MPa).
DO NOT use well water or industrial water. If required to use tap water with
pressure greater than 101.5 psi, install an external pressure reducing valve.
Water Temperature
Use tap water with water temperature between 32°F and 95°F (0 °C to
35 °C). Freezing or hot water may cause deformation or breakage of resin
parts and result in a device failure.
Water Supply Hose or Pipe
A bend, kink, or any other defects in the water supply hose or pipe may cause
a water leak or malfunction; check the water supply hose before turning on
the tap.
Water Supply Control
The tap or faucet of tap water is the mechanism for controlling the water
supply into the device. DO NOT bend the dispensing hose or block the head
during water generation as doing so will cause back pressure, resulting in
leakage or device malfunction.
Ensure to close the water tap after use.
In Case of Freeze Warning
and disconnect the device water supply hose from the tap; drain the water
inside from the water supply hose.
