How to Wall Mount
24
Note
When installing the device on a wall, seek consultation from a local
contractor. If improperly installed, the device may fall and cause an
accident.
DO NOT mount on a wall in the following situations; the device may fall
and cause injury or damage.
·
If the attaching nails cannot be hammered in all the way.
·
When the structural condition of the wall appears to be sufficiently bad
that there is a risk that the device may fall off.
1. Thoroughly clean and dry the wall surface before installation. (If dirt or oil remains,
the adhesion of the double-sided tape may not be at its full strength.)
2. Peel off the double-sided
tape protective cover from
the wall hook, ensure it is
at level as shown, locate it
on a clean wall with the
minimum clearances above
and below as shown, and
press it firmly against the
wall.
12 inches minimum
Press firmly
6 inches minimum
