
IT
VIII.
Simple fault analysis and elimination (varying with different products)
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case
Inspection
Solutions
●
Completely
non-refrigeration
Is power plug off?
Are breakers and fuses a broken?
No electricity or line trip?
Re-plug.
Opening the door and checking whether the
lamp is lit.
•
Abnormal noise
Is refrigerator stable?
Does refrigerator reach the wall?
Adjusting refrigerator's adjustable feet.
Off the wall.
。
•
Poor
refrigerating
efficiency
Do you put hot food or too much food?
Do you open the door frequently?
Do you clip food bag to the seal of door?
Direct sunlight or near a furnace or stove?
Is it well-ventilated?
Temperature setting in too high?
Putting food into refrigerator when hot food
becomes cool.
Checking and closing the door.
Removing the refrigerator from the heat
source.
Emptying the distance to maintain good
ventilation.
Setting to the appropriate temperature.
•
Peculiar smell in
refrigerator
Any spoiled food?
Do you need to clean refrigerator?
Do you pack food of strong flavors?
Throwing away spoiled food.
Cleaning refrigerator.
Packing food of strong flavors.
I.
LED lamp always
flashing
II.
Is the door open for more than 10
minutes?
III.
Close the fridge door, open it again in 2s, checking
whether the LED lamp restores to normal.
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
IX.
Certifications (to be provided by Certification Engineer)
Electrical information
This electrical appliance must be grounded.
This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current
specifications
If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible
shock hazard, do not insert the discarded plug into a socket.
This product complies the EEC directives.