CAS 2700-15 Danfoss AK-SC-255 XML
Page
8
of
28
2016 Chipkin Automation Systems
, 3381 Cambie St- Box 211, Vancouver, BC, Canada, V5Z 4R3
Tel:
(866) 383-1657,
Fax:
(416) 915-4024
Website:
www.chipkin.com
3.2 Connecting to the Gateway
To Change the IP Address of the Gateway (Section 3.3) or to Configure the Gateway (Section 4), you use
a PC and connect to the Gateway using an Ethernet cable. (The Ethernet cable should have been
provided with the Gateway when shipped).
Before connecting the Ethernet cable, set your computer’s IP Address to be similar to the Gateway’s IP
Address.
For Example, a Gateway is assigned the following IP Address by default:
IP Address – 192.168.1.113
Netmask – 255.255.255.0
Gateway – 192.168.1.1
So set your computer to the following:
IP Address – 192.168.1.100
Netmask – 255.255.255.0
Gateway – 192.168.1.1
After setting the IP Address on the computer, connect the Ethernet cable to the computer and to the
Gateway.
