CAS 2700-15 Danfoss AK-SC-255 XML
Page
14
of
28
2016 Chipkin Automation Systems
, 3381 Cambie St- Box 211, Vancouver, BC, Canada, V5Z 4R3
Tel:
(866) 383-1657,
Fax:
(416) 915-4024
Website:
www.chipkin.com
Note:
The BACnet Server settings can be reconfigured from the “BACnet IP Server Config” page.
http://
<IP ADDRESS>
/bin/bacnetipserver/config/
5.
Using the checkboxes next to each parameter in the remaining Danfoss configuration tables,
Check the parameters that you are interested in.
6.
Click “Save Configuration” button at the bottom of the page.
This will create read tasks to read parameters from the Danfoss system and BACnet server tasks
to make the data available to BACnet IP clients.
Image 4.3 –Danfoss XML Configuration Successful
7.
Note:
After finishing the configuration, you must save and reboot the Gateway for the
configured settings to take place.
4.2 Saving the Configuration
After configuring the read tasks for the Danfoss system, return to the System Page by browsing to the
following IP Address: http://
<IP ADDRESS>
/bin/system/ where <IP ADDRESS> is the IP Address of the
Gateway.
To Save the Database, click the ‘Save Database’ link , then click the Ok button when prompted. You will
see some XML saying that the Save was successful. Click the ‘Back’ button in the web browser.
Now Reboot the Gateway by Clicking the ‘Reboot System’ link. When prompted, click the Ok button.
Link is highlighted in the image below