6
module will be affected; standing or walking
on the photovoltaic module is prohibited; at
the same time, in order to avoid glass
damage, it is forbidden to apply excessive
load or Distorted photovoltaic modules.
Do not install or carry photovoltaic modules
by one person. It is forbidden to pick up,
drag, or move photovoltaic modules by
grabbing the junction box (including the box
body, cables, and connectors); when placing
a photovoltaic module on a flat surface, It
must be operated carefully and be aware of
bumps in the corners.
When installing or repairing the photovoltaic
system, do not wear any metal accessories to
avoid the risk of electric shock; if it is
installed far above the ground, please wear a
seat belt.
When operating photovoltaic modules in the
sun, please use insulated tools, and wear
rubber gloves and protective clothing. At the
same time, in order to avoid the risk of arc
and electric shock, do not directly touch the
junction box and the end of the output cable
(connector) with your hands.
When
the
photovoltaic
modules
are
electrically connected, choose a dry and
weak morning or evening; or use opaque
materials to completely cover the surface of
the photovoltaic modules to prevent current
generation.
A certain distance between the photovoltaic
module and the installation surface should be
kept to prevent the installation surface from
touching the junction box.
When installing on the roof, comply with the
fire protection requirements of the building.
It is recommended to install photovoltaic
modules on a fireproof and insulated roof
covering, and ensure adequate ventilation
between the photovoltaic modules and the
installation surface. In order to ensure the
fire rating on the roof, the minimum distance
between the frame of the photovoltaic
module and the roof surface is 10 cm.
The connector must be fully mated when
wiring. If the cable is too long, it is
recommended to fix the cable to the
installation system with a UV resistant nylon
cable tie. When fixing the cable to the
bracket, the bending radius of the cable
should not be less than 60mm.
Avoid
directly
exposing
cables
and
connectors
to
sunlight.
Please
use
anti-ultraviolet cables.
Do not disconnect the electrical connection
