Chino DB600 Series, Инструкция по эксплуатации

Страница: 101 / 150

[DB600] General Instruction Manual MODE 7
- 99 -
□□□
▲
SEL
↑ ↓▼
SEL
P
u
ls
e
o
u
tp
u
t
Output 2
pulse cycle Sets the pulse cycle for the output 2.
"
□□□□
"
to
"
□□
"
1 to 180 [sec]
The display appears when the output 2 uses ON-OFF pulse/SSR drive pulse output
type.
Use the [

], [

] and [ENT] keys to set the pulse cycle.
Use the [>] key to move the cursor to the right digit.
□□□
▲
SEL
↑ ↓▼
SEL
O
u
tp
u
t l
im
ite
r f
o
r o
u
tp
u
t 2
Output 2
output limiter lower limit Sets the lower limit of output limiter for the output 2.
"
□□
"
to
"
□
"
-5.0 to 100.0 [%]
Use the [

], [

] and [ENT] keys to set the lower limit of output limiter for the output 2.
Use the [>] key to move the cursor to the right digit.
□
▲
SEL
↑ ↓▼
SEL
Output 2
output limiter upper limit Sets the upper limit of output limiter for the output 2.
"
□□□
"
to
"
□
"
0.0 to 105.0 [%]
Use the [

], [

] and [ENT] keys to set the upper limit of output limiter for the output 2.
Use the [>] key to move the cursor to the right digit.
□
▲
SEL
↑ ↓▼
SEL
O
u
tp
u
t 2
v
a
ria
tio
n
lim
ite
r
Output 2
variation limiter for fall Sets the output 2 variation limiter for fall.
" "
to
"
□□
"
-100.0 to -0.1 [%]
Use the [

], [

] and [ENT] keys to set the output 2 variation limiter for fall.
Use the [>] key to move the cursor to the right digit.
□
□
▲
SEL
↑ ↓▼
SEL
Output 2
variation limiter for rise Sets the output 2 variation limiter for rise.
"
□□□
"
to
"
□
"
0.1 to 100.0 [%]
Use the [

], [

] and [ENT] keys to set the output 2 variation limiter for rise.
Use the [>] key to move the cursor to the right digit.
□□□
▲
SEL
↑ ↓▼
SEL
O
u
tp
u
t
Output 2
preset manual Sets the output 2 preset manual.
"
□□
"
to
"
□
"
-5.0 to 105.0 [%]
Use the [

], [

] and [ENT] keys to set the output 2 preset manual.
Use the [>] key to move the cursor to the right digit.
5-9-3
Output 2 control system
The output 2 control system of this instrument is intended for the heating/cooling control, and two types of
control calculation: PID and split are available. Understand each of the control calculation method and
select the appropriate one. See the section 6-8 for details.
The required items for PID control calculation setting are "Output 2 PID", "Output 2 PID dead band",
"Output 2 gap", "Output 2 control action" and "Output 2 output preset".
The required items for split control calculation setting are "split Direct" and "split Reverse".