CHINESPORT Spa - ITALIA
mod.14-2014.03.17-14.30-001-ml.docx
7
/
44
GB
3
CONFIGURATED ITEM CODE
Product code
L
T
1
*
*
*
*
*
*
L
T
2
*
*
*
*
*
*
L
T
3
*
*
*
*
*
*
Variable code position
1
2
3
4
5
6
7
8
9
Position
Meaning variable code
Possible values
1-2
Fixed value
3
TYPE OF ADJUSTEMENT
1
no height adjustement
2
electric height adjustement
3
servo-assisted tilt adjustment with gas spring
4
TYPE OF SUPPLY
E
AC Power Supply
B
Power supply with rechargeable batteries
G
Servo-assisted by gas springs
5
MAXIMUM LOAD
1
Normal version - max weight 140 kg
2
Plus version
– max weight 180 kg
6
SECTIONS NUMBER
– POSITION
TYPE
1
three section table (without head) for static exercise in supine pos.
2
four section table (with head) for static exercise in supine pos.a
3
one ection table for static exercise in supine pos.
4
four section table for static exercise in prone pos.
7
FIXED VALUE
8
FINISHING PADDING
W
9
COLOR SETUP
REFERENCE TO CATALOGUE
4
USE
4.1
Unpacking
The product is consigned already assembled. And then simply remove it from the package and
proceed as provided in the following paragraphs.
4.2
Starting
The bed is delivered packaged to protect it from possible damage that may occur during transport.
Never use cutters to open box to prevent padding damages
After unpacking, remove the protective packaging materials. See chapter “Disposal of waste electrical
or elec
tronic equipment and packaging” for disposal instructions. The carrier and the supplier must be
immediately notified of any damage that may have occurred during transport. Damaged equipment
cannot be used.
4.2.1
Electric models
The table is supplied with the footboards upside-down. Before using the equipment, bring the
footboards in working position by operating the spring plunger. The motorized versions must be
properly connected to the mains, while the models powered by a removable battery must be fully
recharged before use; see the relevant chapter.
WARNING
DUE TO ITS WEIGHT, MORE PEOPLE ARE REQUIRED TO TRANSFER AND SET THE EQUIPMENT UP FOR USE.
VERTICALIZATION MUST BE PERFORMED ONLY AFTER PLACING THE FOOTBOARDS IN THE APPROPRIATE POSITION.
