SVG300S 2 FXS SIP ATA User Manual
陈泽科技有限公司
www.stephen-tele.com
11
1.8.13
Alarm setting
If On, the phone will alarm at alarm time.
1.9
Network
In Network you can check the Network status, configure the Network Settings, DDNS settings and VLAN settings.
1.9.1
Network Status: You can check the current Network setting in this page.
1.9.2
WAN Settings
1.9.2.1
Bridge settings: Enable/disable bridge mode. If you set the Bridge On, then the two Fast Ethernet ports will be
transparent
1.9.2.2
WAN Settings: Set network parameters for WAN. WAN can obtain IP address through 3 methods: fixed IP, DHCP
client, PPPoE. You may refer to your current network environment to configure the Sip ATA properly.
1.9.2.3
The PPPoE Setting: Set PPPoE Username and Password. If you have the PPPoE account from your Service Provider,
please input the Username and the Password correctly.
When you finished the setting, please click the Submit button.
