SVG300S 2 FXS SIP ATA User Manual
陈泽科技有限公司
www.stephen-tele.com
28
7
(null)
Show Phone Setting
1.19.1.24
weblogo function
Itno
Command
Description
1
?
Show 'weblogo' Option
2
-on
Vender Logo
3
-off
Crystal media Logo
4
(null)
Show weblogo Setting
1.19.1.25
dsp function is to show dsp code type.
1.19.1.26
addport function is to add Nat Port Mapping
1.19.1.27
cid function
Itno
Command
Description
1
?
Show 'cid' Option
2
-off
Disable Slic Cid signal
3
-1
Tx FSK after 1st Ring
4
-2
Tx FSK before 1st Ring
5
-3
Tx DTMF before 1st Ring
6
-4
Tx FSK with Line reversal before 1st Ring
7
-5
Tx DTMF with Line reversal before 1st Ring
8
-time
FSK cid with time message
9
-single
Single type FSK CID
10
(null)
Show Cid Option
1.19.1.28
slic function
Itno
Command
Description
1
?
Show 'slic' Option
2
-ring
Issue Ring signal
3
-r
read slic addr
4
-w
write slic addr
5
-a
read all slic reg
6
(null)
Show slic register
1.19.1.29
ver function is to show Firmware Version.
How to make a phone call
When your ATA is configured properly, you can make a phone call to your friend in the same Service provider. Please make
sure all the cables are connected properly, like PSTN Line cable, Phone cable, Ethernet cable, power cable.
If you want to make a phone call, you can dial the phone number and press “#” button to start to dial the phone number.
The Sip ATA also provides some functions listed as below:]
1.
Call Waiting: When a new call is coming while you are talking, you can push the Flash button to switch to the
new call. You can push the Flash button to switch between the two calls.
2.
Call Hold: You can push the Hold key to hold the current call for a while, then push Hold key again to keep
talking.
3.
3-way conference: If you want to make a 3-way conference call, you can make a phone call to the first phone
number. After the call is established, push the Flash button, dial #512#, and then you can hear the Dial tone,
