Chiltrix CXI120, Руководство пользователя

Страница: 33 / 50

33
3. Parameters
Fan coil parameter list for MD1001 controller (V2.0)
No. Meaning Range Default Level
01 Target temp upper limit, Maximum Temperature, user setting 60°F ~ 205°F 86°F Factory
02 Target temp lower limit, Minimum Temperature, user setting 60°F ~ 205°F 46°F Factory
03
Target temp in cooling mode. If the room temp is ≥ 79°F, the
fan will come on. If the room temp is ≤ 78°F, the fan will turn
off.
78°F End user
04
Target temp in heating mode. If the room temp is ≤ 67°F, the
fan will come on. If the room temp is ≥ 68°F, the fan will turn
off.
68°F End user
05
Automatic mode target cooling temp. If the room temp is
≥ 79°F the fan will come on in cooling mode. If the room temp
is ≤ 78°F and parameter 20=1,the fan coil will run for 1 min.
every 15 min.
78°F Factory
06
Automatic mode target heating temp. . If the room temp is
≤67°F the fan will come on in Heating mode. If the room temp
is 68°F and parameter 20=1,the fan coil will run for 1 min.
every 15 min.
68°F Factory
07
In heating mode, if the coil temp is lower than Parameter 07,
the fan motor will stop. See CX30 heating set temperature.
41°F ~ 104°F 77°F Factory
08
In cooling mode, if the coil temp. is higher than 68°F, the fan
motor will stop. (1-Yes; 0-No)
0 ~ 1 1 Factory
09 Start the ultra-low fan speed (1-Yes; 0-No) 0 ~ 1 0 Factory
10 Is there a water valve (1-Yes; 0-No) 0 ~ 1 1 Factory
11 Is there floor heating (1-Yes; 0-No) 0 ~ 1 0 Factory
12 Display in Fahrenheit (1-°F; 0-°C) 0 ~ 1 1 Factory
13 Is it the main controller (1-Yes; 0-No) 0 ~ 1 0 Factory
14 Address 1 ~ 99 15 Factory
15 Lock the button (1-Yes; 0-No) 0 ~ 1 0 Factory
16
When the button is locked, is the remote controller working?
(1-Yes; 0-No)
0 ~ 1 1 Factory
17
Is there a password that should be input before locking the
button? (1-Yes; 0-No)
0 ~ 1 0 Factory
18 Password 1 0 ~ 99 50 Factory
19 Password 2 0 ~ 99 50 Factory
20
In standby mode, the fan motor will intermittently turn on
and off. (1-Yes; 0-No)
0 ~ 1 1 Factory