Chiltrix CXI120, Руководство пользователя

Страница: 35 / 50

35
Using the remote controller
Function of “F.Cool” and “F.Heat”
By pressing the key “F.Cool”, the system will be automatically set to the cooling mode
With a high fan speed.
By pressing the key“F.Heat”, the system will be automatically set to the heating mode
with a high fan speed.
Time Setting
Press and hold the key till the time value flashes, then you can adjust the current
time value by pressing the key “+” or “-”. To save the setting above, please press the key
again. Attention, the 12-hour clock is adopted to show the current time value.
Timing Start-Up or Timing Shut-Down
ON This key is available only when the unit is POWER OFF, but not interruption
of power supply.
TIME ON / 1 One hour after setting Timing Start-Up, the unit will automatically start up.
The number shown stands for the timing hours.
OFF This key is available when the unit is POWERED ON.
TIME OFF / 1 One hour after setting Timing Shut-Down, the unit will automatically shut
down. Also, the number shown stands for the timing hours.
The range of timing is from 1 hour to 11 hours. If the setting value is over 11 hours, the
setting of timing will be cancelled.
Sleeping Function
①To start or cancel the sleeping function, please press the key .
②The sleeping function can only be set in the heating or cooling mode.
③When the sleeping function is activated, the icon will be shown at the top right
corner of the LCD screen which belongs to the remote controller. Meanwhile, “TIME OFF”
and “7”will be shown at the lower right corner of the LCD screen. It means that the unit
will automatically shut down 7 hours after the setting . To change the timing number, even to
cancel the timing function , please press the key “ OFF”.
④1 hour after setting the sleeping function, the wind speed will automatically change to
the low wind speed, but then you can also change the wind speed by press .
⑤In two hours after setting the sleeping function in the cooling mode, the set
temperature will increase 1
℃
or about 2
℉
per hour.
⑥In three hours after setting the sleeping function in the heating mode, the set
temperature will decrease 1
℃
or about 2
℉
per hour .
Switch to Celsius or Fahrenheit
To Switch to Celsius or Fahrenheit, please press the key “C°/F° ”.
LED Screen Light Up or Not
To let the LED Screen of the unit light up or not, please press the key .