CHIKO AIRTEC CHP-5000AT3-DSA-UD, Инструкция по эксплуатации

Страница: 61 / 77

Chapter 5 Maintenance and Checkup
CMN015-005
原本
(Original instructions) 57
Chapter 5
Maintenance and Checkup
CAUTION
•
Before starting maintenance and checkup, be sure to break the electrical
circuit by turning off the power supply and disconnecting the plug from the
power outlet.
•
This task requires two or more people. Be sure to wear protective equipment.
•
If you use a worn or damaged filter, internal electric parts will be damaged.
In order to prevent breakdowns and accidents, be sure to perform regular
maintenance and inspection.
•
Replace the filter in an area with sufficient space.
Also, please ensure you install the filter the correct way round.
IMPORTANT
•
Lay a protective sheet outside the clean room before replacing.
•
Depending on the type of dust collected, dust may scatter when replacing.
Wear protective goggles and mask during any work.
5.1
Filter maintenance and replacement
If clogging occurs, a “WARN2” warning appears. Replace the primary filter.
CAUTION
Wipe off any foreign particles adhering to the packing parts with a waste cloth or
similar, and clean.
Possible cause of trouble such as diminished suction power and dust leakage,
etc.
5.1.1
Primary filter maintenance and replacement
IMPORTANT
•
The primary filter should be replaced in an area large enough to open the suction-
side filter case.
1.
Remove the two tubes and release the
latches. (There are also latches on the
other side.)
2.
Attach the wrench and raise the blower
chamber
4.