YSM2
Installation Instructions
8
overtighten mounting hardware!
Figure 7
Attaching End Brackets to Speaker
YSP-1000 Speakers
NOTE:
Ensure that hook on speaker brackets (B and C) point
down and face inside of speaker. (See Figure 8)
Figure 8
1.
Attach speaker brackets to left and right side of speaker,
using two M6 x 12mm Phillips screws (F) on each bracket.
(See Figure 8)
2.
Proceed to
Connecting Speaker to Wall Bracket
.
YSP-800 Speakers
NOTE:
Ensure that hook on speaker brackets (B and C) point
down and face outside of speaker. (See Figure 9)
Figure 9
1.
Attach speaker brackets to left and right side of speaker,
using four M4 x 10mm Phillips screws (E) on each bracket.
(See Figure 9)
Connecting Speaker to Wall Bracket
1.
Insert four 10-24 x 5/8" Phillips screws (G) into the sides of
the wall bracket (A) and partially thread them into the holes.
(See Figure 10).
Figure 10
2.
Lift speaker and tip towards wall bracket, engaging the
speaker bracket (B and C) top slots over the wall bracket top
screws. (See Figure 10)
3.
Swing the speaker down, engaging speaker bracket bottom
slots over wall bracket bottom screws. (See Figure 10)
4.
Tighten two Phillips screws on each side.
Steel Stud
Drywall
(J) x 4
(K) x 4
Wall Bracket (A)
Anchor Metal Channel
SIDE VIEW
(F) x 4
(B)
(C)
Back of
YSP-1000
Speaker
(G) x 8
(C)
(B)
Back of
YSP-800
Speaker
(G) x 4
1
Partially thread
into holes (x 4)
(A)
