RPA Elite Series Projector Mount
Installation Instructions
12
2d
Securing Projector with Interface Bracket
to Model RPM-A, RPM-B and RPM-C
Mounts.
WARNING:
IMPROPER INSTALLATION CAN
LEAD TO PROJECTOR FALLING RESULTING IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT. Make certain mounting slots in mount
base slide under thumb screws and that screws are
seated in the back of slots.
1.
Verify mounting screws are properly seated in
mounting slots in mount base.
2.
Move locking lever to "Locked" position as shown in
figure 2d at left.
3.
Insert key into lock and turn to secure projector to
mount.
Securing Projector with Interface Bracket
to Model RPM Mount.
WARNING:
IMPROPER INSTALLATION CAN
LEAD TO PROJECTOR FALLING RESULTING IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT. Make certain mounting slots in mount
base slide under thumb screws and that screws are
seated in the back of slots.
1.
Turn six thumb nuts until tight to secure projector to
mount.
NOTE:
This step applies only to Model RPM. See the
procedure below and figure 2d for instruction
on securing Models RPM-A, RPM-B and RPM-
C to interface bracket.
2c
1
X 6
2
3
Example Only
(Interface bracket
varies dependent
on projector model)
Example Only
(Interface bracket
varies dependent
on projector model)
