PSMH2465
Installation Instructions
8
Installing Display
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware.
1.
Install four mounting buttons (D) onto display using four
M6 x 35mm (F) Phillips pan head screws. (See Figure 9)
Figure 9
2.
Move two locking flags (C) on wall mount (A) to the OPEN
position. (See Figure 10)
Figure 10
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT. Displays can weigh in
excess of 210 lbs (95.3 kg). ALWAYS use at least two people
and proper lifting techniques when installing display.
3.
Lift display following lifting instructions provided by display
manufacturer.
4.
Align mounting buttons on display with four teardrop
mounting holes in mount. (See Figure 11)
Figure 11
5.
Move display forward until recessed area of mounting
buttons is positioned over lower area of teardrop mounting
holes. (See Figure 11)
6.
Lower display until recessed area of mounting buttons is
seated in lower area of teardrop mounting holes. (See
Figure 11)
7.
Move two locking flags (C) to CLOSED position and lock, if
desired, with a cable, bolt or padlock. (See Figure 8)
Figure 12
8.
Route wires and cables to display.
(D) x 4
2
(F) x 4
OPEN
2
(C) x 2
4
3
6
lock here (optional)
CLOSED
(C) x 2
7
