13
Parameters
SELECTION OF PROCESS PARAMETERS
(see explanation under paragraph
Start
Mode
mode
3L
of chapter
MIG Process
).
Accessories
USE OF MACHINE ACCESSORIES
(see ex-
planation under chapter
MIG Process
).
Settings
MACHINE SETTINGS MENU
(see explana-
tion under chapter
MIG Process
).
G
JOB
Job Menu
(see explanation under chap-
ter
MIG Process
).
6.3 MMA PROCESS.
A
B
C
F
G
H
O
N
M
L
I
A
The screen displays the welding current in Amperes
and the welding voltage in Volts.
B
Hot Start
.
It is the overvoltage supplied at the arc ignition time.
It is adjustable from 0 to 100% of set welding current.
C
Arc Force.
It is the adjustment of the arc dynamic chara teristic.It is
adjustable from 0 to 100% of set welding current.
F
MENU
Menu.
To enter this function select it with your finger.
Selecting it you enter the
Main Menu
.
Process
SELECTION OF THE WELDING PRO-
CESS, MIG, TIG
or
MMA (
see explanation
under chapter
MIG Process)
.
Parameters
PROCESS PARAMETERS SELECTION.
•
Hot Start.
It is the time of overvoltage supplied at the arc ignition
time.
Range from 0 to 100 sec.
Turn the knob
2
to select the parameter and confirm
the selection by pressing the knob.
To adjust the value simply turn the knob
2
. To confirm
the selection press knob
2
or the key
.
Press the key
DEF
to reset the factory set parameters.
•
Hot Start Time.
It is the time of overvoltage supplied at the arc ignition
time.
Range from 0 to 100 sec.
Turn the knob 2 to select the parameter and confirm
the selection by pressing the knob.
To adjust the value simply turn the knob 2. To confirm
the selection press knob 2 or the key
.
Press the key
DEF
to reset the factory set parameters.
•
Arc Force.
It is the adjustment of the arc dynamic characteristic.
It is adjustable from 0 to 100% of set welding current.
Turn the knob 2 to select the parameter and confirm
the selection by pressing the knob.
This value is adjusted by turning the knob 2. To confirm
the selection simply hold down the knob 2 or the key
.
Press the key
DEF
to reset the factory set parameters.
Содержание MultiMig 721 Multivoltage
