10
•
Postflow
.
The adjustment may range from 0 to 25
Turn the knob
2
to select the parameter and confirm
the selection by pressing the knob.
The value is adjusted by turning the knob
2
. To confirm
the selection simply hold down the knob
2
or the key
.
Press the key
DEF
to reset the factory set parameters.
Accessories
USE OF THE MACHINE ACCESSORIES.
•
Bluetooth controlled welding mask. (optional)
.
In order to use the mask, the kit must be already assem-
bled in the power source. You simply turn on the weld-
ing mask, activate the function on the power source
display, setting to ON and pair via Bluetooth the weld-
ing power source to the mask by selecting the "PAIR"
function. To test the function, simply press the "DARK"
button on the display ensuring that the mask glass be-
comes dark.
•
Push-pull torch use instructions
.
Adjustment of the Push-pull force
can vary from -99
to +99.
This function adjusts the drive torque of the push-pull
motor in order to make the wire feed linear.
Turn the knob
2
to select the parameter and confirm
the selection by pressing the knob.
The value is adjusted by turning the knob
2
. To confirm
the selection press knob 2 or the key
.
Press the key
DEF
to reset the factory set parameters.
This function will be displayed on the screen only
after this accessory is assembled inside the power
supply.
•
Maximum inching
.
The purpose is to stop the welding machine if the wire
flows for the preset length in cm after starting with no pas
-
sage of current. Adjustment
OFF
- 50 cm.
Turn the knob
2
to select the parameter and confirm the
selection by pressing the knob.
To confirm the value, simply hold down the knob
2
or the
key
.
Press the key
DEF
to reset the factory set parameters.
Settings
MACHINE SETTINGS MENU.
•
Date and Time Setting
.
Turn the knob
2
to select parameter "Clock " and con-
firm the selection by holding down the knob.
Values are adjusted by turning the knob
2
and are con-
firmed by holding the knob down.
To confirm date and time press the key
OK
.
To exit the function press the key
.
•
Factory setup resetting
.
This function allows return to the factory preset values.
Three resetting modes are possible:
- All.
- Resets only stored "job" working programs.
- Excludes the "jobs": Resets all but saves "Job" work-
ing programs.
Turn the knob
2
to select the function and confirm the
Содержание MultiMig 721 Multivoltage
