Installation Instructions
MSP-WRTIDSKY1 Skybox Kit
5
FLAT PANEL DISPLAY AND H BOX
INSTALLATION PROCUEDURES
Flat Panel Display
WARNING: Improper installation can cause serious per-
sonal injury! Make sure that the structural members can
support a redundant weight factor
five times
the total
weight of the equipment you intend to support overhead.
The structure must be reinforced before you install the Kit
if the structure cannot support a redundant weight factor
five times
the total weight of the equipment.
NOTE:
Items in parentheses () refer to parts shown in
“PARTS” on page 6.
1. Install flat panel display on LCD mount brackets (20) and
secure using four M4 X 10mm Phillips pan head screws (80)
(see Figure 9).
2. With four screws securing LCD mount bracket and four screws
securing display to LCD mount bracket loose, position display
to desired location and height.
3. Tighten four screws securing LCD mount bracket and four
screws securing display to LCD mount bracket.
H Box (Not Included)
1. Install H box bracket (not included) on LCD mount
brackets (20) and secure using four 10-32 X 3/8” button-head
cap screws (70) (see Figure 10).
2. Install H box (not included) on H box bracket (not included)
secure using four screws (not included) (see Figure 11).
button-head
cap screws
cap screws
button-head
Figure 9. Flat Panel Display Installation
Figure 10. H Box Bracket Installation
Figure 11. H Box Installation
