CHIEF LBM Series Скачать руководство пользователя страница 2

LBM Series

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty!  It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING:

Failure to provide adequate structural strength

for this component can result in serious personal injury or
damage to equipment!  It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.

WARNING:

Do NOT stack multiple accessories on the

same display wall! Do NOT connect accessories to walls that
are already three display high. Display walls may NOT be
stacked higher than three displays high!

WARNING:

Do NOT install LBM Series mounts to any

surface other than concrete! Concrete flooring must be at
least 4" in thickness and NOT be covered with any other type
of flooring material. Concrete anchors must be installed
directly into concrete surface.

WARNING:

Use this mounting system only for its intended

use as described in these instructions. Do not use
attachments not recommended by the manufacturer.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment!  It is the
installer’s responsibility to make sure the combined weight of
each display and attached accessories mounted to the LBM
mount does not exceed the limits listed below. If FCA2X1U,
FCA3X1U or FCA3X1UP accessories are added to either the
LBM2X2U, the LBM3X2U or the LBM3X1UP, the weight limit
for each display becomes 100 lbs (45.4 kg) rather than 125

lbs (56.7 kg).

MODEL

Max Weight
Allowed for EACH
Display

Max Weight
Capacity of
Mounting System

LBM2X2U

125 lbs

(56.7 kg)

500 lbs

(226.8 kg)

LBM3X2U

125 lbs

(56.7 kg)

750 lbs

(340.2 kg)

LBM3X3U

100 lbs

(45.4 kg)

900 lbs

(408.2 kg)

LBM3X1UP

125 lbs

(56.7 kg)

375 lbs

(170.1 kg)

LBM2X2UP

100 lbs

(45.4 kg)

400 lbs

(181.4 kg)

LBM3X2UP

100 lbs

(45.4 kg)

600 lbs

(272.2 kg)

LBM2X2U

LBM3X2U

LBM3X3U

LBM3X1UP

LBM2X2UP

LBM3X2UP

125

125

125

125

125

125

125

125

125

125

100

100

100

100

100

100

100

100

100

100100

100

100

100 100100

100

100

100

125 125125

Содержание LBM Series





















Отзывы: